Planmeca ProMax X-ray User Manual

INTRODUCTION
2 ProMax X-ray unit with Dimax3
User’s Manual
1.1 Unit symbols
En: Type B applied part (Standard IEC 60601-1)
Fr: Partie appliquée du type B (norme CEI 60601-1)
En: Alternating current (Standard IEC 60417)
Fr: Courant alternatif (norme CEI 60417)
En:
Attention, consult accompanying documents
(Standard IEC 60601-1)
Fr:
Attention, consulter les documents d'accompagnement
(norme CEI 60601-1)
En:
X-ray source assembly, emitting (Standard IEC 60417)
Fr:
Ensemble radiogène à rayonnement X, en émission
(norme CEI 60417)
En: Temple supports
Fr: Système de contention des tempes
Electrostatic sensitive device (Standard IEC 60417)
Separate collection for electrical and electronic equipment
according to Directive 2002/96/EC (WEEE).
Planmeca pursues a policy of continual product development. Although every effort is
made to produce up-to-date product documentation this publication should not be re-
garded as an infallible guide to current specifications. We reserve the right to make
changes without prior notice.
COPYRIGHT PLANMECA 2006-02
PUBLICATION PART NUMBER 10007367 Revision 20
The manufacturer, assembler, and importer are responsible for the safety, reliability and
performance of the unit only if:
- installation, calibration, modification and repairs are carried out by qualified author-
ized personnel
- electrical installations are carried out according to the appropriate requirements such
as IEC364
- equipment is used according to the operating instructions

Planmeca ProMax X-ray Specifications

General

Brand	Planmeca
Model	ProMax X-ray
Category	Medical Equipment
Language	English