Planmeca ProMax X-ray User Manual

ProMax X-ray unit with Dimax3 3
WARNINGS AND PRECAUTIONS
User’s Manual
2 WARNINGS AND PRECAUTIONS
NOTE IT IS VERY IMPORTANT THAT THE PLACE
WHERE THE UNIT IS TO BE USED AND THE
POSITION FROM WHICH THE USER IS TO
OPERATE THE UNIT ARE CORRECTLY
SHIELDED. SINCE RADIATION SAFETY
REQUIREMENTS VARY FROM COUNTRY TO
COUNTRY AND STATE TO STATE IT IS THE
RESPONSIBILITY OF THE USER TO ENSURE
THAT ALL LOCAL SAFETY REQUIREMENTS ARE
MET.
CAUTION This X-ray unit may be dangerous to both patient
and operator unless safe exposure values are
used and correct operating procedures are
observed.
NOTE If the X-ray unit has been stored at temperatures
under +10°C for more than a few hours, time must
be allowed for the unit to reach room temperature
before turning it on.
CAUTION Use the DIMAX3 digital X-ray system according
to the instructions given in this manual. Do not
drop the sensor head. The Planmeca limited war-
ranty does not cover damage which is due to
misuse, e.g. dropping the sensor head, neglect,
or any cause other than ordinary application.
Do not use the sensor head if the shock indicator
located on the sensor head is red - contact your
local support for help.
If you have any reason to believe that the sensor
might be faulty, take a test exposure before tak-
ing a patient exposure.
shockwarningD3.eps
Shock indicator

Planmeca ProMax X-ray Specifications

General

Brand	Planmeca
Model	ProMax X-ray
Category	Medical Equipment
Language	English