34
Notes:
• Mount the slave flash on the included stand. See Attaching
your flash to the stand on page 11.
• Before shooting, perform a test flash and test shooting.
• The transmission distance might be shorter depending on
conditions such as the positioning of the slave flash, the
surrounding environment, and weather conditions.
Positioning and operating range using
multiple slave flashes
You can divide the slave flashes into two or three groups and
perform TTL auto-flash while changing the flash ratio (factor). In
addition, you can set and shoot with a different flash mode for
each firing group (up to five groups).
Auto shooting with two slave groups
Auto shooting with three slave groups
To Next Page
Loading...