4
8 Do not use your flash in the presence of flammable gases,
chemicals, and other similar materials. In certain
circumstances, these materials may be sensitive to the strong
light emitting from your flash and fire or electromagnetic
interference may result.
9 Overheating occurs if you use your flash continuously
without letting it cool down. We advise that you let your
flash cool 10 minutes after 30 continuous full-power flashes.
SAVE THESE INSTRUCTIONS
Features
• Designed for demanding use
• High-output design for maximum performance
• Full feature set for maximum flexibility
• TTL compatibility for seamless integration with camera
focus and metering system.
• Advanced backlit screen for visibility in low-light
• Uses 4 AA batteries (not included)
Package contents
• Platinum Advanced On-camera TTL Flash for Canon or
Nikon
•Carrying Case
•Stand
•User Guide
Flash body
Notes:
•The External power supply socket is used to connect an
external battery pack or power supply (battery pack and
power supply are not included).
•The USB port is for firmware updates only. You cannot use
this port to charge or power your flash.
Catchlight
panel
Built-in wide
panel
Flash head
Sync cord
jack
USB port
Optical control
sensor
Focus assist
beam
Slave flash
ready indicator
External
power supply
socket
Hotshoe
To Next Page
Loading...
