Pointman TP-9200 - 9 Other Issues; Color Ribbons; Monochrome Ribbons

72
73
8.2 Other Issues
Troubleshooting Ribbons
Trouble Solution
Found frequently ribbons cut in the
front edge of card when printing
- C h e c k i f X - s t a r t c o o r d i n a t e v a l u e o n t h e printer d r i ve r i s s e t c o r r e c tly .
The recommendation of X-start coordination value is 14 ±2
Found frequently ribbons cut in the
front edge of card when printing
- C h e c k i f X - s tar t c o o rd inate valu e o n t h e pri nter d r i v e r i s s et co r re c t l y.
The recommendation of X-start coordination value is 14 ±2
Printer not found in Card Designer or
application software
- Check that printer driver is correctly installed.
- Check that communication cable is properly connected.
- Reboot your PC.
Other than power LED, 4 Front LEDs
Continuosly ash in sequence
- Check with dealer for rmware download.
- Download the latest version of rmware for the printer.
- Perform install using rmware install program.
Ribbon Type Specications TP-9000 TP-9200
Blue 1000 Prints/Roll O O
Black 1000 Prints/Roll O O
Red 1000 Prints/Roll O O
Green 1000 Prints/Roll O O
White 1000 Prints/Roll O O
Metallic Gold 1000 Prints/Roll O O
Metallic Silver 1000 Prints/Roll O O
KO (black and overlay) 500 Prints/Roll O O
Color Ribbons Specications TP-9000 TP-9200
YMCKO 200 Prints/Roll O O
1/2YMCKO 300 Prints/Roll O O
YMCKO-K 167 prints/Roll O O
9.1 Color Ribbons
9.2 Monochrome Ribbons
9
Ribbons