5.30
ENGINE
12. Disconnect the ignition coil connections (9) and EV
solenoid from the ECU harness.
13. Disconnect the EV solenoid (10) from the ECU harness.
14. Disconnect the EV vent lines from the EV base (11) and
secure the vent lines out of the way.
15. Remove the drive belt, driven and drive clutches. See
Chapter 6.
16. Remove the recoil rope from the handle and route rope
through the guide on the chassis brace and secure the recoil
rope by tying a knot (12) so that it does not go into the recoil
housing.
17. Drain the coolant from the engine.
8
9
10
11
12
To Next Page
Loading...
