Polaris 2007 Two Stroke User Manual

9.10
REAR SUSPENSION
Torsion Spring Detail
The torsion spring tension is determined by the following factors.
1. Wire Diameter (B).
2. Number of coils (F).
3. Degree of the open angle (G).
Square Torsion Springs
SPRING PN (LAST 3
DIGITS (A)
WIRE
DIAMETER
INCHES (B)
LEG 1
INCHES
(C)
LEG 2
INCHES
(D)
COIL ID
INCHES
(E)
# OF COILS
INCHES (F)
DEGREES
OPEN ANGLE
(G)
SPRING
WIDTH
INCHES
(H)
7042068 LH
7042069 RH
.359 16.5 4.5 1.95-2.01 8.64 47 3.75
7041911 LH
7041912 RH
.347 16.5 4.5 1.82-1.88 7.75 90 3.49
7041627 LH
7041628 RH
.347 16.5 4.5 1.82-1.88 7.71 77 3.45
7042064 LH
7042065 RH
.359 16.5 4.5 1.95-2.01 7.63 50 3.45
7042159 LH
7042160 RH
.347 15.625 3.75 1.89-1.91 6.71 77 3.45
7041902 LH
7041903 RH
.359 16.5 4.5 1.79-1.85 7.75 90 3.5
7041629 LH
7041630 RH
.359 16.5 4.5 1.79-1.85 7.71 77 3.46
A
C
D
E
F
G
H
A. Last 3 digits of PN
B. Wire Diameter
C. Leg 1
D. Leg 2
E. Coil I.D.
F. # of coils
G. Degrees open angle
H. Spring width

Polaris 2007 Two Stroke Specifications

General

Brand	Polaris
Model	2007 Two Stroke
Category	Snowmobiles
Language	English