11.47
BATTERY & ELECTRICAL SYSTEMS
11
CARBURETED ELECTRICAL
SYSTEMS
EC50PL Stator Specifications
NOTE: Use a multimeter to test the stator circuits.
Remember to test the circuits when the engine is
cold and after the engine has been running for some
time.
EC34 / EC55 Stator Specifications
NOTE: Use a multimeter to test the stator circuits.
Remember to test the circuits when the engine is
cold and after the engine has been running for some
time.
500cc EV / 600 HO Stator Specifications
NOTE: Use a multimeter to test the stator circuits.
Remember to test the circuits when the engine is
cold and after the engine has been running for some
time.
Ignition Coil Packs
NOTE: Specifications listed for all models except
EC50PL (488cc) as this model features a CDI / coil
pack.
Exhaust Valve Solenoid
Knock Sensor
Specifications
BRN / WHT TO BLK / RED 164
YELLOW TO YEL / RED 0.2 - 0.5
YEL / RED, WHT, BRN TO GROUND 0
Specifications
YEL TO BRN 0.16
BRN TO ENGINE 0
BLK / RED TO GRN 13
RED TO GRN 13
RED TO ENGINE OPEN
BLK TO ENGINE 0
WHT / RED TO WHT 185
WHT TO ENGINE OPEN
Specifications
YEL TO BRN 0.15
BRN TO ENGINE 0
BLK / RED TO GRN 15
RED TO GRN 15
BLK or WHT TO ENGINE 0
WHT / RED TO WHT 185
Specifications
BLK TO WHT (Primary) 0.3
BLK or WHT TO SECONDARY LEAD OPEN
SECONDARY LEAD TO LEAD 5K
PLUG CAPS 10K
Specifications
Coil Resistance
(WHT/YEL to RED)
15 +/- 15% @ 68°F (20°C)
To Next Page
Loading...
