Polaris 2007 Two Stroke - Rear Shock Specifications; Walker Evans Fts 7043204; Fox Fts 7043267

9.26
REAR SUSPENSION
REAR SHOCK SPECIFICATIONS
Walker Evans FTS 7043204
Fox FTS 7043267
ITEM NOTE
Extended Length 12.10" (30.7 cm)
Collapsed Length 8.60" (21.8 cm)
Stroke 3.50" (8.9 cm)
Shock Rod .625" (1.6 cm)
IFP Depth 2.25" (5.7 cm)
Shaft PN 1800316
PSI 200
Spring 7043147
Spring Ratio 130/270
Free Length 8.22" (20.9 cm)
Hose length 9.13" ±.13" (23.2 cm ±3.3mm)
Fluid 5w
Factory setting
Adjuster at 4 clicks (±1) from
full counterclockwise position
Reservoir fitting angle 15°
±10° from the center line
of the shock
ITEM NOTE
Extended Length 12.07" (30.7 cm)
Collapsed Length 8.63" (21.9 cm)
Stroke 3.44" (8.7 cm)
Shock Rod .50" (1.27 cm)
IFP Depth measured from the
bottom of the shock body.
1.8" (4.57 cm)
Shaft PN 1500715
PSI 200
Eyelet
Apply Primer N and red
Loctite® 271
Torque 30 ft-lb (41 N-m)
Lower Body Cap
Apply Primer N and Green
Loctite® 638
Torque 75 ft-lb (102 N-m)
Lock Ring Torque 10 ft-lb (14 N-m)
Bearing Cap Torque 30 ft-lb (41 N-m)
Spring 7043147
Spring Ratio 130/270 lb/in
Free Length 8.22" (20.9 cm)
Spring Installed length 7.84" (19.9 cm)
Stock Clicker Setting 8 ± 1