Polaris 2007 Two Stroke User Manual

6.12
CLUTCHING
Drive Belts
*Belt dimensions are given in nominal dimensions. There is a +/- variance for all critical dimensions. Clutch set up must be inspected
when a new belt is installed and, if necessary adjusted.
The drive belt is an important component of the converter system. In order to achieve maximum efficiency from the converter, drive
belt tension (deflection), clutch offset, and alignment must be adjusted properly.
Part
Number
Belt Width
(Projected)*
in/mm
Side
Angle
Overall*
Center to
Center in/
cm*
Outer
Circumference
in/cm
Notes
3211042 1.375/34.9 32_ 12/30 47.25/120 Common production belt.
3211045 1.375/34.9 32_ 12/30 47.125/119.7 Close tolerance version of 3211042
3211058 1.250/31.75 28_ 11/28 43.313/110 P-90 belt
3211059 1.250/31.75 28_ 12/30 45.125/114.6 Longer P-90 belt
3211061 1.375/34.9 32_ 12/30 47.188/119.9 CVT version of 3211045
3211065 1.438/36.5 28_ 12.5/31.75 48.375/122.9 CVT Double Cog Storm belt
3211066 1.375/34.9 28_ 12/30 47.25/120 Double Cog-CVT- thicker than the 3211070.
3211067 1.375/34.9 28_ 12/30 47.25/120
“Sticky compound” Good for low
horsepower trail riding. Drag racing belt.
3211070 1.375 / 34.9 28_ 12/30 47.25/120 Late model P-85 systems
3211073 1.438 / 36.5 28_ 12.5/31.75 48.375/122.9
“Sticky compound” Good for low
horsepower trail riding. Drag racing belt.
3211074 1.438 / 36.5 28_ 12/30 47.625/121
“Sticky compound” Good for low
horsepower trail riding. Drag racing belt.
3211075 1.438 / 36.5 28_ 12/30 47.625/121 Double Cog CVT
3211080 1.438 / 36.5 28_ 11.5/29.2 46.625/118.4 Double Cog CVT version of 3211078
3211078 1.438 / 36.5 28_ 11.5/29.2 46.62 / 118.4 Standard Drive Belt
3211099 1.490 / 37.84 28_ 11 / 27.9 46.06 / 116.9 Double Cog CVT
3211111 1.537 / 39 28_ 11.5/29.2 47.67 / 121 Super Cog Belt
3211115 1.46 / 37.1 26_ 11.5 / 29.2 46.77 / 118.8
Raw Edge Double Cog Variable Speed Drive
Belt

Polaris 2007 Two Stroke Specifications

General

Brand	Polaris
Model	2007 Two Stroke
Category	Snowmobiles
Language	English