10.66
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
3. Install audio system assembly and align mounting
points.
4. Install fasteners to front support ROPS monting
points. Torque fasteners to specification.
TORQUE
Audio System Fasteners:
3.5 lb-ft (4.7 Nm)
5. Connect ROPS audio harness to audio system
harness connectors, matching wire colors.
NOTICE
EARLY MODELS: Connect brown ROPS audio harness
wire to black audio system wire.
6. Install Rear View Mirror. Refer to “Rear View Mirror
Installationpage 10.67” procedure.
7. Install the U-type nuts onto front support ROPS to
visor panel top mounting points.
8. Install U-type nuts onto visor panel to audio system
mounting points.
BODY / FRAME
To Next Page
Loading...
Need help?
General
