Polaris GENERAL 2019 - Front Bumper Removal; Exterior Body Component Removal

10.26
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
FRONT BUMPER REMOVAL
1. Unpin the winch hook.
2. Remove the end caps from the front bumper.
3. Remove the front bumper upper mounting fasteners.
NOTICE
On International models, disconnect the turn indicators
in the bumper before removing front bumper.
4. Remove the front bumper lower mounting fasteners
and remove bumper from the vehicle.
EXTERIOR BODY COMPONENT REMOVAL
1. Remove the hood from the vehicle. Refer to “Hood
Removal”page 10.25 procedure.
2. Remove the front bumper from the vehicle. Refer to
“Front Bumper Removal”page 10.26 procedure.
3. Remove the fastener holding the front fender flair to
the front fender. Pull the front fender flair from the
tabs holding it to the vehicle.
BODY / FRAME