Polaris RANGER RZR 170 - Shocks; Shock Exploded View; Shock Removal

5.17
BODY / SUSPENSION / STEERING
5
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
3. Install the washers and torque the castle nut to
specification. Install a new cotter pin into the castle
nut.
4. Install the wheel, wheel nuts and rubber dust boot.
Torque the wheel nuts to specification.
SHOCKS
Shock Exploded View
Shock Removal
1. Elevate the front or rear end of the vehicle off the
ground to remove shock spring tension.
2. Remove the shock mounting bolts and remove the
shock from the vehicle.
3. Replace the shock, compression spring or adjustment
collar as required (see “Shock Replacement”).
= T
Front Hub Nut:
40 ft-lbs (55 Nm)
= T
Wheel Nuts:
27 ft-lbs (37 Nm)
Replace Washers
40 ft-lbs
(55 Nm)
CAUTION
Severe injury could occur if machine tips or falls.