9.16
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
3. Install the cable, pin and clip pin. Test the park brake
for proper function.
PARKING BRAKE DISC
Disc Inspection
Measure the brake disc with a micrometer. If the
thickness of the disc is less than specified, replace the
brake disc (see Chapter 9 – Disc Replacement, page ).
Disc Replacement
1. Remove the parking brake caliper from the disc (see
Chapter 9 – ).
2. Using a 1/2″ socket and ratchet, remove the brake
disc retaining bolt and flat washer.
3. Remove the disc from the transmission shaft.
4. Install the new brake disc. Install the mounting bolt
and flat washer. Torque the mounting bolt to
specification.
TORQUE
Parking Brake Disc Mounting Bolt:
14 ft-lb (20 Nm)
BRAKE SYSTEM
To Next Page
Loading...
