Polaris Widetrak LX 2008 - Page 215

8.20
Steering and Suspension Systems
9923396 - 2007-2012 EDGE/Widetrak LX Service Manual
©2011 Polaris Sales Inc.
EDGE 136 Rail Assembly
Assembly Notes
• Never re-use Nylock nuts fasteners with locking
agent. Always replace with new parts.
• All pivots must rotate freely after tightening
fasteners.
• Apply Polaris Premium All Season Grease to all
grease zerks as outlined in the maintenance table.
SLIDER
SLIDER FASTENER
RAIL TIP
REAR-REAR SCISSOR STOP
FRONT-REAR SCISSOR STOP
CARRIER WHEEL
CARRIER WHEEL
WHEEL MOUNT
SPRING GUIDE
IDLER ADJUSTMENT BOLT
A
A
C
C
C
A
= T
A = 3 - 6 Ft.Lbs.
B = 35 Ft.Lbs.
C = 19 Ft.Lbs.
CAUTION
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners when mounting
the suspension to the tunnel.