• Setting the Sharpness
Use the sharpness setting to highlight or blend the edges of subjects in
pictures.
1. Press the button to set the camera to
Still Image mode.
1/2
STILL
Resolution 3648x2736
Compression Super Fine
Sharpness Normal
Digital Zoom Off
AF- assist Beam Off
Sharpness
Strong
Normal
Soft
2. Press the button and press the
button to enter menu bar.
3. Press the or to select
(Sharpness).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
STRONG Increases contrast on the edge of the picture. Image color noise
(grain) may occur in the recording image.
NORMAL The edges of the image are sharp, this is suitable for printing.
SOFT Softens the edge of the picture, creating a “soft focus” effect.
To Next Page
Loading...
Need help?
General
