• Setting Auto Power Off
The camera performs the following power save operation to conserve
battery power.
1. Access the setup menu.
SETUP
Date /Time
Auto Power Off 1 Minute
Beep Sound On
Volume
Video System LCD
1/3
.
Auto Power Off
Off
1 Minute
3 Minutes
2. Press the or button to select
(Auto Power Off).
3. Press the button to enter.
4. Press or to select the desired
setting.
5. Press the button to confirm your
choice.
1 MINUTE The camera is designed to power off
automatically to save battery life after the
specified period of inactivity.
3 MINUTES The camera will enter power saving mode
automatically after 1 minute’s inactivity and
power off after 3 minutes’ inactivity.
OFF The power saving function is not active.
NOTE:
Auto power off is automatically disabled under any one of the following
conditions:
• While the camera is recording a video clip.
• While the camera is running a slide show.
To Next Page
Loading...
Need help?
General
