• Selecting the Focus Area
1. Press the button to set the camera
to Still Image mode.
2. Press the button and press the
button to enter menu bar.
STILL
Quick Review 2 Seconds
Focus Area Single AF
Smile Detection Off
Blink Off
Face Tracking Off
2/2
Focus Area
Single AF
3-Point AF
3. Press the or to select (Focus
Area).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
Single AF The camera uses the single AF window to automatically
set the focus. When the shutter button is pressed halfway,
the camera starts focusing until it “locks” onto your
subject. When in focus, the focus frame will turn green.
If your subject is not in focus, the focus frame will turn
red. Release the shutter button and press the shutter
button halfway down again. Keep your subject centered
on the LCD display. When the best focus position has been
selected, the green focus frame will be displayed on the
LCD screen.
3-Point AF The camera uses three AF windows (left, center and right)
to automatically set the focus. When the shutter button
is pressed halfway, the camera starts focusing until it “
locks” onto your subject. When the best focus position
has been selected, the green focus frame will be displayed
on the LCD screen.
To Next Page
Loading...
Need help?
General
