Supported peripherals4
Connect supported and compatible peripherals to your Poly Studio X72 system before powering on the system.
For information on setting up peripherals in the system web interface, see the
Poly Video Mode Administrator
Guide
or the
Poly Partner Mode Administrator Guide
on the Poly Documentation Library.
Your Poly Studio X72 system supports connecting the following peripherals:
● Analog microphones and speakers connected to the system 3.5 mm audio input and output ports
● Poly Expansion Table microphone connected to the expansion microphone port
● USB audio DSP connected to a USB Type-A port
● USB cameras connected to the USB Type-A ports
● A PC or HDMI peripheral connected to the system HDMI In port for content sharing
● In Device Mode you can connect a PC to the system to use the system camera, speaker, microphones, and
display from your PC.
Connect a Poly Expansion microphone to the system
Expand the microphone reach of your system by connecting an optional Poly Expansion microphone.
NOTE: The system supports connecting one Poly Expansion microphone. The Poly Expansion microphone
can't be combined with other external microphones.
■
Connect the Poly Expansion microphone cable from the Poly Expansion microphone to the system Poly
Expansion microphone port on the system.
Connect a USB camera to the system
Connect a supported or compatible USB camera to a USB Type-A port on your Poly Studio X72 system.
NOTE: Observe the following when connecting USB cameras to your system:
● Power off the system before connecting or disconnecting USB cameras.
● If you connect a third-party camera to the system, camera controls may be limited or unavailable. Poly
DirectorAI features such as camera tracking and DirectorAI Perimeter aren't available.
● Connect USB cameras to USB Type-A ports on your system. The USB Type-C port is for Device Mode
only.
10
Chapter 4Supported peripherals
To Next Page
Loading...
