Poly Studio X72 - Locate the System IP Address Using the System Monitor and a USB Mouse; Locate the System IP Address Using a Paired Poly Touch Controller

Locate the system IP address using the system monitor and a USB
mouse
If you don't have a touch monitor, remote control, Poly TC8 or Poly TC10 touch controller paired to your system,
you can use a USB mouse to identify the system IP address.
1. Connect a USB mouse to an available USB-A port on the back of the system.
A cursor appears.
2. Move the mouse to the right side of the screen.
3. Press the left mouse button and swipe left to reveal the Poly menu.
The IP address displays at the top of the menu.
Locate the system IP address using a paired Poly touch controller
You can view the system IP address on a paired Poly TC10 or Poly TC8 touch controller.
1. On the Poly TC10 or Poly TC8 user interface, swipe left from the right side of the screen.
2. Select Settings.
System information, including the system IP address, displays.
18
Chapter 7System Maintenance