Place a Call from a Locked Phone
When the phone is locked, you can place outgoing calls to any contact unless your system administrator
restricts your phone to placing calls only to emergency numbers, such as 911, and authorized numbers
that your system administrator can set up.
Procedure
» From the Place an Authorized Call screen, select a number and select Dial.
Related Links
Locking Poly Trio on page 19
Placing Intercom Calls
Like a normal call, the intercom feature enables you to place a call to a contact. An intercom call differs
from a normal call in that the call recipient's phone answers automatically as long as they don't have an
active call. Check with your system administrator to find out if this feature is available on your phone.
If the call recipient has an active call, the recipient can choose to answer the intercom call. Otherwise, the
phone answers the intercom call automatically after their active call ends.
Related Links
Answer an Intercom Call on page 28
Place an Intercom Call
You can place an intercom call from your phone to quickly relay a message to a contact.
Tip: Your system administrator can set up your phone to automatically call a specific contact when you
select Intercom. If your phone is set up this way, select Intercom and wait for your contact to
answer before speaking your message.
Procedure
1. Select Intercom.
2. Enter a number or select a contact.
3. Select Dial .
The phone plays a tone and the contact’s phone answers the call automatically.
4. After the call is answered, speak your message then select Hang Up .
Place an Intercom Call During a Call
You can place an intercom call to another contact during an active call.
Procedure
1. Select Hold > Intercom.
The active call goes on hold and the dialpad displays.
2. Enter a number or select a contact.
3. Select Dial .
The phone plays a tone and the contact’s phone answers the call automatically.
Audio Calls
24
To Next Page
Loading...
