Change User Detection for Power Saving Mode
You can set the level of sensitivity that the system uses to detect users within its proximity.
When the Poly Trio detects users in its vicinity, the screen remains active. Set the sensitivity to 0 to
disable the user detection feature for either office hours or off-hours.
Procedure
1. Go to Basic settings.
2. Select Power Saving > User Detection.
3. Select Office Hours Sensitivity and enter sensitivity level (0 to 10) for office hours.
4. Select Off Hours Sensitivity and enter sensitivity level (0 to 10) for off-hours.
5. Select Save.
Control Where Audio Plays
When your Poly Trio system is paired with a Poly Trio Visual+, Trio VisualPro or RealPresence Group
Series system, you can have audio play from the Poly Trio system speakers or from the paired device’s
monitor(s) or external speakers.
Note: If you have a Polycom EagleEye Acoustic camera connected to your paired Trio VisualPro or
RealPresence Group Series system, Poly recommends using your Poly Trio system for audio.
Procedure
1. Go to Settings > Basic > Preferences.
2. Select Audio Output and choose one of the following options:
• Phone speakers: Audio plays on the system only.
• TV speakers: Audio plays on the paired device’s connected monitor(s) or external speakers.
• Automatic - based on call type: The system automatically chooses where to play audio
based on the call type. The Poly Trio system is used for audio calls, while the paired device
is used for video calls.
You can toggle this setting while in a call.
Set a Ringtone for Incoming Calls
A simple way to personalize your phone is to change the ringtone. You can pick unique ringtones for the
different lines on the phone. The default ringtone is Low Trill.
Procedure
1. Go to Settings > Basic > Preferences.
2. Select Ring Type.
3. From the Ring Type screen, select a ringtone.
4. Select Play to hear the ringtone.
Related Links
Features for Hearing-Impaired Users on page 87
Poly Trio Settings
82
To Next Page
Loading...
