EasyManua.ls Logo

Poly Trio 8500 - Change How Far-End Video Displays; Place a Skype for Business Video Call; Stop Sending Video

Poly Trio 8500
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Change How Far-End Video Displays
You can adjust video settings to control the appearance of video received from the far-end.
You can adjust the appearance of the far-side video so that it displays as one of the following:
Normal—The video image displays with correct proportions. Black bars appear on the top, bottom,
or sides of the area to maintain the correct aspect ratio if the aspect ratio of the received video does
not match the display area. The portions of the video that are not being received display as black
bars.
Full—If the received video image is not the same aspect ratio as the display area, the video image
is stretched to fill the area. If the aspect ratios match, no stretching occurs.
Crop—The video image is resized to maintain the correct aspect ratio. Any parts of the image that
do not fit within the display area are cropped.
Procedure
1. Go to Settings > Basic > Video.
2. Select Video Screen Mode and select a video screen setting.
3. Select Save.
Place a Skype for Business Video Call
Depending on how the system is set up by your administrator, you can place a video call to one contact or
add video during an audio call.
When the system is registered with the Skype for Business Server, you can place a video call to your
Skype for Business contacts. Video displays automatically for up to six contacts, as long as those
contacts have video enabled and are streaming video.
Procedure
1. Select Place a Call.
2. Enter a contact's number or select a contact from Contacts or Recent Calls.
3. Select Dial .
4. In the Call screen, select Start Video, if video does not display automatically.
Related Links
Place an Audio Call
Stop Sending Video
You can stop transmitting video at any time during a call.
Stopping video does not create an audio-only call. Even if you stop video, video information is still
transmitted to the far-end and you are still in a video call. When you stop video, the stopped video icon
is displayed and the far-side cannot see you.
Note: You can't start and stop far-end video. If the phone is set up to receive far-side video, the far-end
video always displays.
Video Calls on Poly Trio Systems
43

Table of Contents

Other manuals for Poly Trio 8500

Related product manuals