Polycom HDX Series Administrator's Guide

Administrator’s Guide for Polycom HDX Systems
12 - 18
Voices at the near site
sound distorted through the
speakers at the near site.
The far site has distorted
audio from the far-site
speakers.
The far site's distorted
audio is often caused by
overloading the input stage
of the far site’s audio
amplifier.
Ask the far site to reduce their Polycom HDX system
volume control to about 25, and to increase their
external audio amplifier volume control to maintain
the same loudness.
The Audio Meter screen
shows a reading for
Polycom Mic but no
microphone is connected -
the system receives local
audio from a mixer.
Echo cancellation is in use.
The system displays the
audio line input level in this
case.
This is normal.
Symptom Problem Corrective action

Polycom HDX Series Specifications

General

Network Protocols	H.323, SIP
Video Resolution	1080p (depending on model)
Audio Technology	Polycom StereoSurround
Content Sharing	People+Content
Microphone	Integrated or external
Video Standards	H.264, H.263
Audio Standards	G.711, G.722, G.722.1, G.728
Data Standards	H.239
Network Interface	10/100/1000 Ethernet
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI, DVI-I
Audio Inputs	HDMI, RCA
Audio Outputs	RCA
Power Consumption	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% to 90% non-condensing