Polycom HDX Series Administrator's Guide

Networks
2 - 23
Configuring Telephony
To configure telephony options:
1. Go to System > Admin Settings > Network > Telephony.
2. Configure these settings on the Telephony screen:
To configure the analog phone line (POTS line):
1. Go to System > Admin Settings > Network > Telephony.
Enter the System Telephone Number for the analog phone line.
2. Go to System > Admin Settings > Network > Call Preference.
Enable Analog Phone.
3. Go to System > Admin Settings > Network > Call Preference > .
Add Analog Phone to the Audio Dialing Order on the Network Dialing
screen.
Setting Description
Room Telephone
Number
Enter the telephone number of the room where the system
is located.
System Telephone
Number
Specifies the analog phone number of the system, including
country and area codes for the system’s location.
Outside Line
Dialing Prefix
Specifies the dialing prefix used to call outside the network.

Polycom HDX Series Specifications

General

Network Protocols	H.323, SIP
Video Resolution	1080p (depending on model)
Audio Technology	Polycom StereoSurround
Content Sharing	People+Content
Microphone	Integrated or external
Video Standards	H.264, H.263
Audio Standards	G.711, G.722, G.722.1, G.728
Data Standards	H.239
Network Interface	10/100/1000 Ethernet
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI, DVI-I
Audio Inputs	HDMI, RCA
Audio Outputs	RCA
Power Consumption	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% to 90% non-condensing