Polycom HDX Series Administrator's Guide

Administrator’s Guide for Polycom HDX Systems
1 - 2
Positioning the System
Position the system so that the camera does not face toward a window or other
source of bright light. Place the camera and display together so that people at
your site face the camera when they face the far site display.
Polycom HDX systems are designed to be placed on a tabletop or in an
equipment rack.
To position the system:
1. Install the mounting brackets on the system if you need to mount it in an
equipment rack, or install the self-adhesive feet if you will place the
system on a table or shelf.
2. Place the system in the desired location. Leave enough space to work, so
that you can connect the cables easily.
Powering On and Off
Connect power and power on the system after you have connected all of the
equipment that you will use with it.
To power on the Polycom HDX system:
¾ Press the power button on the remote control.
¾ Press the power switch on the front of the system.
The Polycom splash screen is displayed within about 10 seconds.

Polycom HDX Series Specifications

General

Network Protocols	H.323, SIP
Video Resolution	1080p (depending on model)
Audio Technology	Polycom StereoSurround
Content Sharing	People+Content
Microphone	Integrated or external
Video Standards	H.264, H.263
Audio Standards	G.711, G.722, G.722.1, G.728
Data Standards	H.239
Network Interface	10/100/1000 Ethernet
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI, DVI-I
Audio Inputs	HDMI, RCA
Audio Outputs	RCA
Power Consumption	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% to 90% non-condensing