Positioning the System
You can mount the Pano system on a table, wall, or monitor.
If you mount the system on a tabletop, desk, or shelf, position the cables away from foot traffic to prevent
accidental disconnections or damage.
Note: As the Pano device uses standard Bluetooth and Wi-Fi frequencies, it’s subject to the same
interference as any other RF devices. Deploy the Pano device in an appropriate location to
optimize the RF signals within the area it will be accessed from.
Mount the System on a Wall
You can mount the Pano system on a wall.
Before you begin, make sure no cables are connected to the system.
System Hardware
Polycom, Inc. 11
To Next Page
Loading...
Need help?
General
