3. For Choose Network Type, select Wi-Fi.
4. Select Enable Administrator Access to This Network to enable administrators to access the
system web interface on the Wi-Fi network.
For higher security, you can disable this option to limit access to the system web interface through
LAN connections only.
5. Do one of the following:
▪ Select a network from Available Wi-Fi Networks. (The system lists networks in order of
signal strength.)
▪ Enter the network name in the SSID field.
Selecting a new SSID erases the previous SSID and relevant Wi-Fi settings from the system.
6. Configure the following settings:
Available settings vary with your selections.
Setting Description
Security Specifies the encryption protocol:
▪ None
▪ WEP
▪ WPA/WPA2-PSK
▪ 802.1xEAP
Key (Passphrase/PSK) Specifies an encryption passphrase (like a password) for the Wi-Fi network. You
must enter the passphrase to connect to the Wi-Fi network.
EAP Method Specifies the extensible authentication protocol (EAP) for WPA-Enterprise
(802.1xEAP):
▪ PEAP
▪ TLS
▪ TTLS
▪ PWD
Phase 2 Authentication Specifies the Phase 2 authentication method:
▪ MSCHAPV2
▪ GTC
Username Specifies the login user name for WPA-Enterprise (802.1xEAP).
Password Specifies the login password for WPA-Enterprise (802.1xEAP).
IP Address Select one of the following to set your system Wi-Fi network IP address:
▪ Obtain IP address automatically (You must have a DHCP server in your
environment to use this option.)
▪ Enter IP address manually
Your IP Address Is Specifies the IP address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Network Settings
Polycom, Inc. 18
To Next Page
Loading...
