Cascading Conferences
Polycom, Inc. 83
Dialing Direction Select Dial-out.
Type Select H.323.
IP Address Enter the IP address of the Signaling Host of the MCU running the other (second)
conference, where the cascade enabled Entry Queue is defined.
Alias Name If you are using the target MCU IP address, enter the Conference ID of the target
conference. For example: 24006
If a gatekeeper is used, instead of the IP address, you can enter the prefix of the
target MCU as registered with the gatekeeper, as part of the dialing string and the
conference ID in the format:
<Target MCU Prefix><Conference_ID>
For example: 92524006
If the conference has a password and you want to include the password in the dial
string, append the password to in the dial string after the Conference ID.
For example: 92524006##1234
If the conference has a password and you do not want to include the password in
the dial string, set the
ENABLE_CASCADED_LINK_TO_JOIN_WITHOUT_PASSWORD flag to YES.
For more information see Modifying System Flags.
Alias Type Select E.164 (digits 0-9, *, #).
New Participant – Dial-out Cascade Link
Field Description
To Next Page
Loading...
