Administration and Utilities
Polycom, Inc. 143
Banner Display and Customization
The Login Screen and Main Screen of the RMX Manager can display informative or warning text banners.
These banners can include general information or they can be cautioning users to the terms and conditions
under which they may log into and access the system, as required in many secured environments.
To customize the Multilingual Setting:
» In RMX Manager, go to Setup > Customize Display Settings > Banners Configuration.
Software Management
The Software Management menu is used to backup and restore the Collaboration Server's configuration
files and to download MCU software. Software Management operations include:
● Configuration files backup
● Configuration files restoring
● Collaboration Server software files download
SNMP settings
Time configuration
● CDR files are not included in the backup process and should be backed up manually by saving the
CDR files to a destination device.
Backup Configuration Files
Backup and Restore Guidelines are:
● Direct access to the Collaboration Server file system is disabled in both Ultra Secure Mode and
standard security mode.
● System Backup can only be performed by an administrator.
● The System Backup procedure creates a single backup file that can be viewed or modified only by
developers.
● A System Backup file from one Collaboration Server can be restored on another of the same type.
● To ensure file system consistency, do not perform any configuration changes as the system does not
suspended them during the backup procedure.
● The following parameters, settings and files are backed up:
MCMS configuration files (/mcms/Cfg):
Network and service configurations
Rooms
Profiles
Reservations
System Flags
Resource Allocation
To Next Page
Loading...
