Administration and Utilities
Polycom, Inc. 145
To Ping a network entity from the Collaboration Server:
1 In RMX Manager, go to Administration > Tools > Ping.
2 Modify or complete the following fields:
3 Click Ping.
The Ping request is sent to the IP Address of the Collaboration Server entity. The Answer is either
OK or FAILED.
Configure Notification Settings
The Collaboration Server can display notifications when:
● A new Collaboration Server user connects to the MCU.
● A new conference is started.
● Not all defined participants are connected to the conference or when a single participant is connected.
● A change in the MCU status occurs and an alarm is added to the alarms list.
A welcome message is displayed to the Collaboration Server user upon connection.
To configure the notifications:
1 In RMX Manager, go toSetup > Notification Settings.
The following notification options are displayed.
Ping Parameters
Field Description
IP Version Select IPv4 or IPv6 from the drop-down menu.
IP Address Enter the IP Address of the network entity to ping.
Notification Settings Parameters
Field Description
New Connection Notification of a new user/administrator connecting to the Collaboration Server.
New Conference Created New conference has been created.
Conference Not Full The conference is not full and additional participants are defined for the
conference.
Welcome Message A welcome message after user/administrator logon.
Active Alarms Update Updates you of any new alarm that occurred.
Fault List Updated Updates you when the faults list is updated (new faults are added or existing
faults are removed).
To Next Page
Loading...
