Administration and Utilities
Polycom, Inc. 134
11 Click Add to add a new Manager terminal.
Depending on the SNMP Trap Version selected, one of two New Trap Destination dialog opens.
12 Define the following parameters:
Trap Destination This box lists the currently defined IP addresses of the Manager terminals to
which the message (trap) is sent.
IP Enter the IP address of the SNMP trap
recipient.
All Versions
Community Name Enter the Community Name of the
manager terminal used to monitor the
MCU activity
Version 1
and Version
2
User Name Enter the name of the user who is to have
access to the trap.
Version 3
Authentication
Protocol
Enter the authentication protocol: MD5 or
SHA.
Privacy Protocol Enter the privacy protocol: DES or AES.
Engine ID Enter an Engine ID to be used for both
the Agent and the Trap.
Default: Empty
SNMPv3 - Traps
Field Description Version
IP Address Enter the IP address of the SNMP trap recipient. 1,2,3
Enable Trap
Inform
An Inform is a Trap that requires receipt confirmation from the entity
receiving the Trap. If the Engine ID field (Version 3) is empty when Enable
Trap Inform has been selected, the Engine ID is set by the Client.
Community Name Enter the Community Name of the manager terminal used to monitor the
MCU activity
1, 2
SNMPv3 - Traps
Field Description
To Next Page
Loading...
