Entry Queues, Ad Hoc Conferences and SIP Factories
Polycom, Inc. 164
Routing Name Enter a name using ASCII text only. If no Routing Name is entered, the system
automatically assigns a new name as follows:
• If an all ASCII text is entered in Display Name, it is used also as the
Routing Name.
• If any combination of Unicode and ASCII text (or full Unicode text) is entered
in Display Name, the ID (such as Conference ID) is used as the Routing
Name.
Profile Select the Profile to be used by the Entry Queue.
The default Profile is selected by default. This Profile determines the Bit Rate
and the video properties with which participants connect to the Entry Queue
and destination conference.
To connect to a Video Switching conference via Entry Queue, the Profile
assigned to the Entry Queue must be set to Video Switching. It is
recommended to use the same profile for both the destination conference and
Entry Queue.
In Ad Hoc conferencing, it is used to define the new conference properties.
ID Enter a unique number identifying this conferencing entity for dial in. Default
string length is 4 digits.
If you do not manually assign the ID, the MCU assigns one after the completion
of the definition. The ID String Length is defined by the flag
NUMERIC_CONF_ID_LEN in the System Configuration.
Entry Queue Mode Select the mode for the Entry Queue
Standard Lobby (default) - When selected, the Entry Queue is used as a
routing lobby to access conferences. Participants connect to a single-dial lobby
and are routed to their destination conference according to the Conference ID
they enter.
Ad Hoc - Select this option to enable the Ad Hoc option for this Entry Queue.
In this mode, when the participant enters the target conference ID the system
checks whether a conference with that ID is already running on the MCU. If
not, the system automatically creates a new ongoing conference with that ID.
IVR Only Service Provider - When selected, the current Entry Queue is
designated as a special Entry Queue for providing IVR Services to SIP calls on
behalf of the DMA system, resulting in the IVR Only Service Provider Entry
Queue routing SIP calls to the DMA system. For more details, see IVR
Provider Entry Queue (Shared Number Dialing).
External IVR Control - IVR Services can be controlled externally from an
application server (such as the DMA) supporting the MCCF-IVR (Media
Control Channel Framework-Interactive Voice Response) package.
When selected, the connection process of the participant to the conference via
the Virtual Entry Queue is controlled and managed by an external IVR service
of an application server (for example, DMA).
Entry Queue Definitions Parameters
Option Description
To Next Page
Loading...
