System Flags
Polycom, Inc. 177
BONDING_CHANNEL_DELAY
(ISDN-video)
When connecting a bonding group, this is the delay
(number of 1/100 seconds) between dialing attempts
to connect sequential channels.
The channel per second connection of ISDN-video
switches can vary and cause timing issues resulting
in bonding channel disconnection.
Default value: 50
HW/VE No
BONDING_DIALING_METHOD When set to SEQUENTIAL, the MCU initiates
channel connections until it reaches the number of
channels defined by the
BONDING_NUM_CHANNELS_IN_GROUP flag.
When a channel is connected, dialing begins for the
next channel in the group.
When set to BY_TIMERS, the MCU initiates channel
connections using values of the
BONDING_CHANNEL _DELAY and
BONDING_GROUP_DELAY flags.
Dial the first group of channels using the
BONDING_CHANNEL_DELAY between dialing
attempts for each channel in the group.
Default value: SEQUENTIAL
HW Yes
BONDING_GROUP_DELAY
(ISDN-video)
When connecting several bonding groups, this is the
delay (number of 1/100 seconds) preceding the first
dialing attempt to connect the next bonding group.
Default value: 500
HW Yes
BONDING_NUM_CHANNELS_IN_
GROUP (ISDN-video)
The number of channels in the bonding group to be
connected before dialing the next sequential
channel.
Default value: 50
HW Yes
BURN_BIOS Although not recommended, setting this flag’s value
to NO will prevent BIOS upgrade.
Default value: YES
Possible values: YES/NO
HW/VE Yes
CAC_ENABLE When set to YES, enables Call Admission Control
implementation in the RealPresence Collaboration
Server.
Default value: NO (CAC is disabled)
Possible values: YES/NO
HW/VE Yes
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
