System Flags
Polycom, Inc. 187
ENABLE_SELECTIVE_MIXING You need to manually add this flag and enable or
disable the function by changing the value to
YES/NO. MCU reset isn’t required when changing
the system flag value.
Possible values: YES/NO
Yes
ENABLE_SIP_PEOPLE_PLUS_CO
NTENT
If security is of a higher priority than SIP Content
sharing, SIP People+Content
™
technology can be
disabled by setting this system flag to NO. (The
content management control (BFCP) uses an
unsecured channel (port 60002/TCP) even when
SIP TLS is enabled).
Default value: YES
Possible values: YES/NO
HW/VE Yes
ENABLE_SIP_PPC_FOR_ALL_USE
R_AGENT
When set to YES, SIP People+Content and BFCP
capabilities are declared with all vendors’ endpoints.
Default value: YES
Possible values: YES/NO
HW/VE Yes
ENABLE_SIRENLPR Enables or disables the Polycom
®
Siren
™
Lost
Packet Recovery Audio Algorithm for use in IP
(H.323, SIP) calls in both CP and VSW conferences.
Default value: NO
Possible values: YES/NO
HW/VE Yes
ENABLE_SIRENLPR_SIP_ENCRY
PTION
Enables the Polycom
®
Siren
™
Lost Packet Recovery
audio algorithm when using encryption with the SIP
protocol.
Default value: YES
Possible values: YES/NO
HW/VE Yes
ENABLE_TC_PACKAGE Enables or disables the Network Traffic Control.
Default value: NO
Possible values: YES/NO
HW/VE Yes
ENABLE_TEXTUAL_CONFERENC
E_STATUS
Set the flag value to NO to disable Text Indication.
This setting is recommended for MCUs running
Telepresence conferences.
Default value: YES
Possible values: YES/NO
HW/VE Yes
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
