System Flags
Polycom, Inc. 208
REDUCE_CAPS_FOR_REDCOM_
SIP
To accommodate Redcom’s SDP size limit, when the
flag value = YES, the SDP size is less than 2kb and
includes only one audio and one video media line.
Default value: NO
Possible values: YES/NO
HW/VE Yes
REJECT_INCORRECT_PRECEDE
NCE_DOMAIN_NAME
When set to YES, if the Precedence Domain of a
SIP dial-in call does not match the Precedence
Domain of the RealPresence Collaboration Server,
the call is rejected.
Default value: No
Possible values: YES/NO
HW/VE Yes
REMOVE_EP_FROM_LAYOUT_ON
_NO_VIDEO_TIMER
Enables the removal of empty video cells from a
video layout.
Default value: 20
Range:
• 0 – 19 (seconds): The feature is disabled.
• 20 – 300 (seconds): The feature is enabled.
HW/VE Yes
REMOVE_H323_EPC_CAP_TO_N
ON_POLYCOM_VENDOR
Used to disable EPC protocol. Use of Polycom’s
proprietary protocol, High Profile, EPC, might result
in interoperability issues when used with other
vendors’ endpoints.
Default value: NO
Possible values: YES / NO
HW/VE Yes
REMOVE_H323_HIGH_PROFILE_
CAP_TO_NON_POLYCOM_VENDO
R
Used to disable a high profile protocol. Use of
Polycom’s proprietary protocol, High Profile, might
result in interoperability issues when used with other
vendors’ endpoints.
Default value: NO
Possible values: YES / NO
HW/VE Yes
REMOVE_H323_HIGH_QUALITY_
AUDIO_CAP_TO_NON_POLYCOM
_VENDOR
Used to disable audio codecs G231, G7221C,
G7221, G719, Siren 22, and Polycom
®
Siren
™
14.
Default value: NO
Possible values: YES/NO
HW/VE Yes
REMOVE_H323_LPR_CAP_TO_N
ON_POLYCOM_VENDOR
Used to disable H.323 Polycom Lost Packet
Recovery (LPR) protocol. Use of Polycom’s
proprietary protocol, H.323 Polycom Lost Packet
Recovery (LPR), might result in interoperability
issues when used with other vendors’ endpoints.
Default value: NO
Possible values: YES/NO
HW/VE Yes
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
