System Flags
Polycom, Inc. 210
RTCP_FLOW_CONTROL_TMMBR
_ENABLE
Enables or disables the SIP RTCP flow control
parameter.
Default: YES
Possible values: YES/NO
HW/VE Yes
RTCP_FLOW_CONTROL_TMMBR
_INTERVAL
Modifies the interval (in seconds) of the TMMBR
(Temporary Maximum Media Stream Bit Rate)
parameter for SIP RTCP flow control.
Default value: 180
Range: 5 - 999 (seconds)
HW/VE Yes
RTCP_PLI_ENABLE When set to YES, the (Picture Loss Indication (PLI)
is sent as INFO (and not RTCP).
Default value= YES
Possible values: YES/NO
HW/VE Yes
RTCP_QOS_IS_EQUAL_TO_RTP Default value: YES
Range: YES/NO
HW/VE Yes
RTV_MAX_BIT_RATE_FOR_FORC
E_CIF_PARTICIPANT
Enables the removal of empty video cells from a
Video Layout.
HW/VE Yes
SEND_SIP_BUSY_UPON_RESOU
RCE_THRESHOLD
When set to YES, the RealPresence Collaboration
Server sends a busy notification to a SIP audio
endpoint or a SIP device when dialing in to the
RealPresence Collaboration Server whose audio
resource usage exceeded the Port Usage threshold.
When set to NO, the system does limit the SIP audio
endpoint connections to a certain capacity and will
not send a busy notification when the resource
capacity threshold is exceeded.
Default value: NO
Possible value: YES/NO
HW/VE Yes
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
