System Flags
Polycom, Inc. 222
.
Content Related System Flags
Flag Name Description
CS_ENABLE_EPC Endpoints supporting People+Content (for example, FX
endpoints) might require a different signaling when in content
mode. For these endpoints, manually add this flag with the
value YES (default value is NO) to the
CS_MODULE_PARAMETERS tab.
Default value: NO
Possible values: YES/NO
LEGACY_EP_CONTENT_DEFAULT_LAYOUT Defines the video layout used in legacy endpoint when
switching to Content mode.
Available Layouts
Password Generation Flags
Flag Name Description
FORCE_STRONG_PASSWORD_POLICY When set to YES, this flag implements Strong Password rules.
Default value: NO
Default value in ULTRA_SECURE_MODE=YES
Possible values: YES/NO
HIDE_CONFERENCE_PASSWORD No (default) - Conference and chairperson passwords are
displayed when viewing the Conference/Meeting Room/
Reservation properties. It also enables the automatic generation
of passwords in general.
Yes - Conference and chairperson Passwords are hidden (they
are replaced by asterisks). It also disables the automatic
generation of passwords.
Default value: NO
Possible values: YES/NO
HIDE_CONFERENCE_PASSWORD When set to YES (default in Ultra Secure Mode):
• Conference and chairperson passwords that are displayed in
the RMX Web Client or RMX Manager are hidden when
viewing the properties of the conference.
• Automatic generation of passwords (both conference and
chairperson passwords) is disabled, regardless of the settings
of the flags:
NUMERIC_CONF_PASS_DEFAULT_LEN
NUMERIC_CHAIR_PASS_ DEFAULT_LEN
Default value: NO
Automatic Password Generation Flags
To Next Page
Loading...
