System Flags
Polycom, Inc. 238
SIP_FIPS_MODE This flag controls availability of the PFX/PEM Certificate Method.
Range:
• YES - PFX/PEM is not available for selection in the user interface.
• NO - PFX/PEM is available for selection in the user interface.
Default value:
• Standard Security Mode - NO
• Ultra Secure Mode - YES
SNMP_FIPS_MODE Controls the availability of DES and MD5 Authentication methods.
Possible:
• YES - DES and MD5 are not available for selection in the user
interface.
• NO - DES and MD5 are available for selection in the user
interface.
Default value:
• Standard Security Mode - NO
• Ultra Secure Mode - YES
Login and Session Management System Flags
Flag Name Description
APACHE_KEEP_ALIVE_TIMEOUT If the connection is idle for longer than the number of seconds specified
by this flag, the connection to RealPresence Collaboration Server gets
terminated.
Default value: 15
Default value (ULTRA_SECURE_MODE=YES): 15
Range: 1 - 999
LAST_LOGIN_ATTEMPTS When set to YES, the system displays a record of the last login of the
user.
Default value: NO
Possible values: YES/NO
User Login Record
MAX_KEEP_ALIVE_REQUESTS The number of KeepAliveTimeout request intervals for the Apache
server.
In a Maximum Security Environment this value must be set to a value of
1814400 to ensure that RMX Manager will remain connected for
several hours, but not indefinitely. The exact time period depends on
the type of client that is connected and the number of requests.
Default: 0 (This value should never be used as the connection time is
unlimited.)
(If the SESSION_TIMEOUT_IN_MINUTES System Flag if configured,
RMX Manager will disconnect after the specified period if there is no
keyboard or mouse activity.)
Network Security System Flags
Flag Name Description
To Next Page
Loading...
