Appendix - Polycom Open Collaboration Network (POCN)
Polycom, Inc. 406
For more information see:
Deployment into Lync Environments.
Polycom Unified Communications Deployment Guide for Microsoft Environments, Configuring
Your Collaboration Server System for use with the Lync Server.
3 Register the Collaboration Server with the Lync Server.
a In the IP Network Services Properties dialog, select the SIP Servers tab.
b Set SIP Server to Specify.
c Set SIP Server Type to Microsoft.
d Set Refresh Registration to every 3600 seconds.
e If not selected by default, change the Transport Type to TLS.
f In the SIP Servers table, enter the IP address of the Lync Server in both the Server IP Address or
Name and Server Domain Name fields.
g In the SIP Servers table, set Port to 5061.
h In the Outbound Proxy Servers table, enter the IP address in the Server IP Address or Name field.
(The same value as entered in Step f.)
i In the Outbound Proxy Servers table, set Port to 5061 (the same value as in Step g).
To Next Page
Loading...
