Appendix - Polycom Open Collaboration Network (POCN)
Polycom, Inc. 415
To register the various types endpoints:
1 Configure HDX endpoints to register to Lync Server.
The procedures for configuring HDX endpoints are described in detail in the Polycom Unified
Communications Deployment Guide for Microsoft Environments.
2 Configure H.323 endpoints to register to DMA as SIP Proxy
The procedures for configuring SIP endpoints are described in detail in the Polycom Unified
Communications Deployment Guide for Cisco Environments.
3 Configure SIP endpoints to register to:
DMA as SIP Proxy
Lync Server as SIP Proxy
CUCM as SIP Proxy
The procedures for configuring SIP endpoints are described in detail in the Polycom Unified
Communications Deployment Guide for Cisco Environments.
4 Configure TIP endpoints to register to:
DMA
CUCM
For more information on the above, see Polycom Unified Communications Deployment Guide for Cisco
Environments.
Content
Endpoint Registration and Dialing Method affect the Video and Content Sharing characteristics of the
conference as detailed in the table below.
TIP HD Video Resolution by Line Rate
Line Rate Video Resolution
Line Rate >=3Mbps HD1080p30
3Mbps > Line Rate >= 936kbps HD720p30
Line Rate < 936kbps Call is dropped.
To Next Page
Loading...
