Appendix - Direct Connection to the RealPresence Collaboration Server
Polycom, Inc. 426
● Subnet Mask – 255.255.240.0
Create a Dial-up Connection
Using the This procedure is performed once. Only the Dial field in the Connect applet (see step
11
) is
modified for connection to different modems.
To create a dial-up connection:
1 In Windows, navigate via the Control Panel to the Network Connections applet and select Create
a new connection.
2 When the New Connection Wizard is displayed, click Next.
3 In the Network Connection Type dialog, select Connect to the Internet and click Next.
4 In the Getting Ready dialog, select Set up my connection manually and click Next.
5 In the Internet Connection dialog, select Connect using dial-up modem and click Next.
6 In the Connection Name dialog, enter a Name for the modem connection (e.g. Modem
Connection) and click Next.
7 In the Phone Number to Dial dialog, enter the Phone Number for the modem and click Next.
8 In the Connection Availability dialog, select Anyone’s use and click Next.
9 In the Internet Account Information dialog, complete the Username, Password and Confirm
Password fields, and click Next.
10 The Connection applet is displayed with the field values filled in as specified by the New
Connection Wizard.
11 Click Dial to establish a connection to LAN 3 Port via the modem.
The Windows – Network Connections applet displays Connected status for the new connection.
To Next Page
Loading...
