Conference Profiles and Templates
Polycom, Inc. 31
Multiple
Content
Resolutions
Available only when CP (Continuous Presence) conferencing mode is selected.
Enables content sharing in multiple streams, one for each video protocol: H.263 and H.264. This
allows endpoints with different protocols to connect and disconnect without having to restart
content sharing.
When enabled, choose which content protocols and resolutions to use for each stream of
content.
• Content Protocol
Transcode to H.264 is always selected
Use H.263
Use H.264 if available, otherwise use H.263
Use H.264 cascade and SVC optimized
Use H.264 HD
• Content Resolution—Specify the fixed resolution and frame rate of the content channel for
content sharing in cascaded conferences. Available only when Content Protocol is set to
H.264 cascade and SVC optimized. The content resolutions available for selection depend
on the content sharing mode (highest common or multiple content resolutions), line rate and
content settings selected for the conference.
Send Content
to Legacy
Endpoints
Available only when CP (Continuous Presence) conferencing mode is selected.
When enabled, content can be sent over the video (people) channel to H.323/SIP/ISDN-video
endpoints that do not support H.239 content.
Select this option when Avaya IP Softphone will be connecting to the conference.
H.264 High
Profile
Applies to Appliance Editions only. Displayed only when conferencing mode is VSW (Video
Switching), or the selected Content Protocol is H.264 Cascade Optimized.
In scenarios where endpoints not supporting high profile (such as HDX) are connected to the
conference, it is recommended to clear this check-box to enable them to share content.
Enable MS
RDP Content
When enabled, the MCU starts conferences on Modular MCUs (MMCU) that have sufficient soft
blade resources. MMCUs may be configured with an RDP translator that converts H.264 content
shared from a standard endpoint to RDP content to deliver to a Skype ASMCU. Likewise, when a
Skype client shares RDP content, the RDP translator delivers H.264 content to the MMCU.
Notes:
• For Polycom RealConnect calls to work, set ‘AllowMultiView’ to TRUE on the Skype for
Business Front End Server. This will enable the participants to
connect and receive multiple
video streams.
• This option can be used in place of a separate Polycom
®
ContentConnect™ gateway solution.
Video Quality Parameters
Field Description
To Next Page
Loading...
