Chapter 3 -
3-2
Onscreen User Interface (UI) – Conference Recording
Single Point Recording Using an Endpoint Menu
(onscreen UI)
Main Menu
After using an endpoint to call the RSS 2000 and establish an H.323
connection, the RSS 2000 will present the main menu below.
Figure 3-1 Main Menu
On the interface shown above, use the remote control to highlight and select
Record Video. The user will see the Record Video menu, as shown below.
Figure 3-2 Start Recording
H.239 Dual-stream Recording
Select "Yes" or "No" after selecting Record my PC content to confirm whether
or not the PC content will be recorded along with the audio/video, note that
the default value of this selection is based on the single point recording
setting in the recording setting of the web administrator view. When ”Record
my PC Content” is selected, the RSS 2000 will record the PC content sent by
the endpoint and also store the audio/video bit stream in a file. When played
back from a computer, Windows Media Player is used and will open two
windows: an external (small) window is used to display people video images,
To Next Page
Loading...
Need help?
General
