Polycom SoundPoint IP 550 - Page 40

User Guide for the SoundPoint IP 550/560 Phone
2 - 16
2. Use and to highlight the contact.
You can also use the * key to Page Up and the # key to Page Down.
3. Press the More soft key, and then the Save soft key to save the contact in
the phone’s directory.
4. Press to return to the idle display.
Adding Contacts From the Corporate Directory
To add a contact to your local contact directory from the corporate directory:
1. Press .
2. Select Corporate Directory.
3. Search for the contact.
Refer to Searching the Corporate Directory on page 2-20.
4. Press the View soft key.
The contact’s information appears on the graphic display.
Note
You may want to go to the local contact directory to check if the contact was saved
correctly, and to add any missing fields.