Polycom SoundStation IP 6000 Manual

Figure 10 – Adding/Editing Users
Define the “First Name” and “Last Name” as you deem appropriate. ShoreWare Director will auto-assign the next
available “Number” (i.e., extension), but you can modify it to any available extension. Define the “License Type”
as needed; in this example we chose “Extension and Mailbox” although it’s not necessary to have a mailbox.
Define the proper “User Group” and set the “Home Port” to “Any IP Phone.”
Note: If you configured the “License Type” for “Extension-Only,” you cannot select “Any IP Phone”
but instead must set the “Home Port” for the “SoftSwitch” selection. Save your changes, then scroll down to
the “SIP Password:” section (Figure 11).

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)