Polycom SoundStation2 - Customization Options; Ring Type Selection; Back Light Control

SoundStation2 User Guide - 12
Ring Type
1. Press the Menu button and
choose Settings.
2. Cycle through the options using
the Scrolling buttons
and
choose Ringer Type, and then
press the Select button .
3. Sample the ring types by press-
ing the Scrolling buttons or
the<— and —> soft keys.
4. Press the SAVEsoft key or Select
button to apply the se-
lected ringer setting.
► Press the Exit button to
cancel this change.
Back Light
The SoundStation2’s display lights
up when any button on the keypad is
pressed, or on an incoming call.
To turn the back light on or off:
1. Press the Menu button
and
choose Settings.
2. Cycle through the options using
the Scrolling buttons and
choose Back Light, and then press
the Select button .
► The current status of the back
light will be displayed.
3. Press the ON or OFF soft key or
cycle through OFF and ON by
pressing the Scrolling buttons
.
4. Press the SAVE soft key or Select
button to apply the selected
backlight setting or the Exit but-
ton to cancel this change.