Polycom SoundStation2 - Basic Call Operations; Placing and Answering Calls; Ending a Call

SoundStation2 User Guide - 9
Using SoundStation2
Direct Dial
1. To obtain dial tone, press the
key.
2. Dial the desired number.
Indirect Dial
1. From the Ready screen, dial the
desired number.
2. Press the key or the SEND
soft key to make the call.
► If you make a mistake entering
the telephone number, press the
<DEL soft key.
Answering a Call
Press the key or any number key
to answer an incoming call. Pressing
the button will override all other
telephone activity.
The three LEDs will
blink green when the phone rings.
OR
SEND
Ending a Call
To end a call, press the key.
Placing a Call
SoundStation2 allows you to place a call over an analog
line. Several methods are available to initiate a call.
Answering a Second Call
If you are on a call when another call is
received, you will hear a Call Waiting
tone.
► Press the Conference button
to answer the incoming call.
This rst call will be automati-
cally placed on hold.
► Switch back and forth between
calls using the conference but-
ton .
C onne c tion D iagram
► To cancel the call, press the
key.
► Press the CANCEL soft key to
cancel the call.
The Call waiting feature may not
be available on your telephone line.
Check with your telephone system
administrator or service provider.