Polycom SoundStation2 User Guide/Administrator Guide

SoundStation2 Administrator Guide - 25
Assign a passcode:
1. Press the Menu button ,
choose Admin Setup using the
Scrolling buttons , and press
the Select button . Choose
Passcode using the Scrolling but-
tons , and press the Select
button .
2. Press the ASSIGN soft key and enter
a three-digit password. If you
make an error, press the<DEL soft
key to erase the error.
3. Press the SAVE soft key. You may
press the CANCEL soft key or the
Exit button if you choose not
to save the passcode.
When you select Passcode from the Admin Setup menu,
the screen will display whether or not a passcode is cur-
rently assigned.
Passcode
►Record the passcode. If the passcode is forgotten,
contact Polycom Support at www.polycom.com/support
and click on “How to Contact Support and Service” for
your local support contact information.
Remove a passcode:
Removing the passcode removes the requirement for an
access passcode for the Admin Setup menu.
1. From the Admin Setup menu,
choose Passcode using the Scrolling
buttons and press the Select but-
ton .
2. Press the REMOVE soft key, enter
the current passcode, and press the
ENTER soft key. If you decide not to
remove the password, press the CAN-
CEL soft key or the Exit button .
►If you enter an incorrect pass-
word, you will be notied to try
again.
►If you make an error, press the
<DEL soft key to erase the error.
INCORRECT PASSCODE

Polycom SoundStation2 Specifications

General

Microphone Coverage	360 degrees
Connectivity	Analog
Full Duplex	Yes
Connectivity Technology	Wired
Speakerphone	Yes
Microphone	3 cardioid microphones
Echo Cancellation	Yes
Noise Reduction	Yes
Power Source	AC power adapter
Display	LCD
Dimensions	14.5 x 12.25 x 2.5 inches
Weight	1.75 lbs
Frequency Response	300 Hz - 3.3 kHz
Microphone Pickup Range	Up to 10 feet
Compatibility	Analog phone lines
Warranty	1 year
Ideal Room Size	Small to medium rooms