SoundStation2 Administrator Guide - 28
Caller ID*
You can congure Caller ID according to the specica
-
tions and standards that pertain to the phone line you
are connecting to. Standards may differ from country
to country. Please refer to Appendix A for additional
information.
*Caller ID is a subscription
service. Check with your local
telephone service provider to de-
termine if this service is available
in your area.
Phone System
1. Press the Menu button ,
choose Admin Setup and press the
Select button , enter passcode
(if required) and press the ENTER soft
key. Choose Phone System using
the Scrolling buttons
, and press
the Select button .
2. Choose CallerID from the available
options and press the Select button
.
3. Use the <- and -> soft keys to step
through the available Caller ID op-
tions.
4. Press the SAVE soft key or the Select
button to save your entry.
You may press the Exit button
to cancel your entry.
Flash Timing
You can adjust the timing of the Flash delay to 75, 100,
300, or 600 milliseconds.
1. Press the Menu button ,
choose Admin Setup and press
the Select button , enter the
passcode (if required) and press the
ENTER soft key. Choose Flash Tim-
ing using the Scrolling buttons ,
and press the Select button .
2. Choose Flash Timing from the
available options and press the
Select button .
3. Use the <- and -> soft keys to step
through the available Flash Timing
options.
4. Press the SAVE soft key to save
changes. You may press the
Exit button to cancel
your selection.
To Next Page
Loading...
Need help?
General
